NETGEAR ProSAFE M7100-24X - Ipv6 Host; Ip Domain Retry; Ip Domain Timeout

Utility Commands
438
ProSAFE M7100 Managed Switches
ipv6 host
Use this command to define static host name-to-IPv6 address mapping in the host cache. The
<name> parameter is the host name. The <ipv6-address> parameter is the IPv6 address of
the host.
no ipv6 host
Use this command to remove the static host name-to-IPv6 address mapping in the host cache.
ip domain retry
Use this command to specify the number of times to retry sending Domain Name System (DNS)
queries. The parameter <number> indicates the number of times to retry sending a DNS query
to the DNS server. This number ranges from 0 to 100.
no ip domain retry
Use this command to return to the default.
ip domain timeout
Use this command to specify the amount of time to wait for a response to a DNS query. The
parameter <seconds> specifies the time, in seconds, to wait for a response to a DNS query.
<seconds> ranges from 0 to 3600.
Default none
Format ipv6 host <name> <ipv6-address>
Mode Global Config
Format no ipv6 host <name>
Mode Global Config
Default 2
Format ip domain retry <number>
Mode Global Config
Format no ip domain retry <number>
Mode Global Config
Default 3
Format ip domain timeout <seconds>
Mode Global Config