NETGEAR ProSAFE M7100-24X - Clear Lldp Statistics; Lldp Notification-Interval; Clear Lldp Remote-Data; Show Lldp

Switching Commands
139
ProSAFE M7100 Managed Switches
lldp notification-interval
Use this command to configure how frequently the system sends remote data change
notifications. The <interval> parameter is the number of seconds to wait between sending
notifications. The valid interval range is 5-3600 seconds.
no lldp notification-interval
Use this command to return the notification interval to the default value.
clear lldp statistics
Use this command to reset all LLDP statistics, including MED-related information.
clear lldp remote-data
Use this command to delete all information from the LLDP remote data table, including
MED-related information.
show lldp
Use this command to display a summary of the current LLDP configuration.
Default 5
Format lldp notification-interval <interval>
Mode Global Config
Format no lldp notification-interval
Mode Global Config
Format clear lldp statistics
Mode Privileged Exec
Format clear lldp remote-data
Mode Global Config
Format show lldp
Mode Privileged Exec
Term Definition
Transmit Interval How frequently the system transmits local data LLDPDUs, in seconds.
Transmit Hold
Multiplier
The multiplier on the tr
ansmit interval that sets the TTL in local data LLDPDUs.