EasyManuals Logo

NETGEAR ProSAFE M7100-24X Reference Manual

NETGEAR ProSAFE M7100-24X
636 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #247 background imageLoading...
Page #247 background image
Quality of Service (QoS) Commands
247
ProSAFE M7100 Managed Switches
If the Policy Name is not specified this command displays a list of all defined DiffServ policies. The
following fields are displayed:
show diffserv service
This command displays policy service information for the specified interface and direction. The
<slot/port> parameter specifies a valid slot/port number for the system.
Mark CoS The Class of Service value that is set in the 802.1p header of inbound packets. This is not
displayed if the mark cos was not specified.
Mark IP DSCP The mark/re-mark value used as the DSCP for traffic matching this class. This is not
displayed if mark ip description is not specified.
M
ark IP
Pr
ecedence
The mark/re-mark value used as the IP Precedence for traffic matching this class. This is not
displayed if mark ip precedence is not specified.
Mirror Copies a classified traffic stream to a specified egress port (physical port or LAG). This can
occur in addition t
o any marking or policing action. It might also be specified along with a QoS
queue assignment.
Non-Conform
Ac
tion
The cur
rent setting for the action taken on a packet considered to not conform to the
policing parameters. This is not displayed if policing not in use for the class under this policy.
Non-Conform
COS
The C
oS mark value if the non-conform action is set-cos-transmit.
Non-Conform
DSCP Value
The DSCP mark v
alue if the non-conform action is set-dscp-transmit.
Non-Conform IP
Pr
ecedence Value
The IP Precedence mark value if the non-conform action is set-prec-transmit.
Policing Style The style of policing, if any, used (simple).
Redirect Forces a classified traffic stream to a specified egress port (physical or LAG). This can occur
in addition t
o any marking or policing ac
tion. It might also be specified along with a QoS
queue assignment.
Term Definition
Policy Name The name of this policy. (The order in which the policies are displayed is not necessarily the
same order in which the
y were created.)
Policy Type The policy type (Only inbound is supported).
Class Members List of all class names associated with this policy.
Format show diffserv service <slot/port> [in | out]
Mode Privileged EXEC
Term Definition

Table of Contents

Other manuals for NETGEAR ProSAFE M7100-24X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR ProSAFE M7100-24X and is the answer not in the manual?

NETGEAR ProSAFE M7100-24X Specifications

General IconGeneral
BrandNETGEAR
ModelProSAFE M7100-24X
CategorySwitch
LanguageEnglish

Related product manuals