NETGEAR ProSAFE M7100-24X - Green-Mode Eee-Lpi-History

Green Ethernet Commands
588
ProSAFE M7100 Managed Switches
0/19 Disabled Inactive Disabled
0/20 Disabled Inactive Disabled
--More-- or (q)uit
Interface Energy-Detect Short-Reach-Config Short-Reach EEE
Config Opr Auto Forced Opr Config
--------- --------- --------- --------- --------- ----------- --------
0/21 Disabled Inactive Disabled
0/22 Disabled Inactive Disabled
0/23 Disabled Inactive Disabled
0/24 Disabled Inactive Disabled
0/25 Disabled Inactive Disabled
green-mode eee-lpi-history
Configure Global EEE LPI history collection interval and buffer size using this command. This value
is applied globally on all interfaces on the stack.
Note: The sampling interval configured by the user takes effect immediately.
The current and future samples are collected at this new sampling
interval.
no green-mode eee-lpi-history
Use this command to set the sampling interval or max-samples values to default:
• sampling-inter
val = 3600
• max-samples = 168
Default sampling-interval = 3600; max-samples = 168
Format green-mode eee-lpi-history {sampling-interval <30sec-36000sec>
| max-samples <1-168>}
Mode Global Config
Format no green-mode eee-lpi-history {sampling-interval | max-samples}
Mode Global Config