NETGEAR ProSAFE M7100-24X - Page 587

Green Ethernet Commands
587
ProSAFE M7100 Managed Switches
Example:
(switch) #show green-mode
Current Power Consumption (mW).............. XX
Power Saving (%)............................ XX
Cumulative Energy Saving /Stack (W * H)... XX
Unit Green Ethernet FeaturesSupported
---- --------------------------------
1 Energy-Detect EEE LPI-History LLDP-Cap-Exchg Pwr-Usg-Est
Interface Energy-Detect Short-Reach-Config Short-Reach EEE
Config Opr Auto Forced Opr Config
--------- --------- --------- --------- --------- ----------- --------
0/1 Disabled Inactive Disabled
0/2 Disabled Inactive Disabled
0/3 Disabled Inactive Disabled
0/4 Disabled Inactive Disabled
0/5 Disabled Inactive Disabled
0/6 Disabled Inactive Disabled
0/7 Disabled Inactive Disabled
0/8 Disabled Inactive Disabled
0/9 Disabled Inactive Disabled
0/10 Disabled Inactive Disabled
0/11 Disabled Inactive Disabled
0/12 Disabled Inactive Disabled
0/13 Disabled Inactive Disabled
0/14 Disabled Inactive Disabled
0/15 Disabled Inactive Disabled
0/16 Disabled Inactive Disabled
0/17 Disabled Inactive Disabled
0/18 Disabled Inactive Disabled
Cumulative Energy Saving
per Stack
Estimated Cumulative energy saved per stack in (Watts * hours) due to all green modes
enabled
Current Power
Consumption per S
tack
Power Consumption by all ports in stack in mWatts.
Power Saving Estimated Percentage Power saved on all ports in stack due to Green mode(s) enabled.
Unit Unit Index of given Stack member
Green Ethernet Features
suppor
t
ed
List of Green Features supported on the given unit which could be one or more of the
following: Energy-Detect (Energy Detect), Short-Reach (Short Reach), EEE (Energy
Efficient Ethernet), LPI-History (EEE Low Power Idle History), LLDP-Cap-Exchg (EEE
LLDP Capability Exchange), Pwr-Usg-Est (Power Usage Estimates).
Term Definition