NETGEAR ProSAFE M7100-24X Reference Manual

Management Commands
508
ProSAFE M7100 Managed Switches
sshcon timeout
Use this command to set the SSH connection session timeout value, in minutes. A session is active
as long as the session has been idle for the value set. The time is a decimal value from 1 to 160.
Changing the timeout value for active sessions does not become effective until the session is re
accessed. Also, any keystroke activates the new timeout duration.
no sshcon timeout
Use this command to set the SSH connection session timeout value, in minutes, to the default.
Changing the timeout value for active sessions does not become effective until the session is re
acc
essed. Also, any keystroke activates the new timeout duration.
show ip ssh
Use this command to display the ssh settings.
Default 5
Format sshcon timeout <1-160>
Mode Privileged EXEC
Format no sshcon timeout
Mode Privileged EXEC
Format show ip ssh
Mode Privileged EXEC
Term Definition
Administrative
Mode
This field indicates whether the administrative mode of SSH is enabled or disabled.
Protocol Level The protocol level might have the values of version 1, version 2 or both versions 1 and
v
ersion 2.
S
SH Sessions
Cur
rently Active
The number of SSH sessions currently active.
Max SSH Sessions
Allowed
The maximum number of S
SH sessions allowed.
SSH Timeout The SSH timeout value in minutes.
Keys Present Indicates whether the SSH RSA and DSA key files are present on the device.
Key Generation in
P
r
ogress
Indicates whether RSA or DSA key files generation is currently in progress.

NETGEAR ProSAFE M7100-24X Specifications

General

Brand	NETGEAR
Model	ProSAFE M7100-24X
Category	Switch
Language	English