NETGEAR ProSAFE M7100-24X - Port Lacptimeout (Global Config); Port-Channel Adminmode

Switching Commands
85
ProSAFE M7100 Managed Switches
port lacptimeout (Interface Config)
This command sets the time-out on a physical interface of a particular device type (actor or
partner) to either a long or a short time-out.
no port lacptimeout
This command sets the time-out back to its default value on a physical interface of a particular
device type (actor or partner).
port lacptimeout (Global Config)
This command sets the time-out for all interfaces of a particular device type (actor or partner) to
either a long or a short time-out.
no port lacptimeout
This command sets the time-out for all physical interfaces of a particular device type (actor or
partner) back to their default values.
port-channel adminmode
This command enables a port-channel (LAG). This command sets every configured port-channel
with the same administrative mode setting.
Default long
Format port lacptimeout {actor | partner} {long | short}
Mode Interface Config
Format no port lacptimeout {actor | partner}
Mode Interface Config
Default long
Format port lacptimeout {actor | partner} {long | short}
Mode Global Config
Format no port lacptimeout {actor | partner}
Mode Global Config
Format port-channel adminmode all
Mode Global Config