Security Commands
302
ProSAFE M7100 Managed Switches
The show dot1x detail <slot/port> command will display the following MAC-based dot1x
fields if the port-control mode for that specific port is MAC-based. For each client authenticated
on the port, the
show dot1x detail <slot/port> command will display the following
MAC-based dot1x parameters if the port-control mode for that specific port is MAC-based.
Reauthentication
Enabled
Indicates if reauthentication is enabled on this port. Possible values are ‘True” or “False”.
Key Transmission
Enabled
Indicates if the key is transmitted to the supplicant for the specified port. Possible values
are T
rue or False.
Control Direction The control direction for the specified port or ports. Possible values are both or in.
Maximum Users The maximum number of clients that can get authenticated on the port in the MAC-based
do
t1x authentic
ation mode. This value is used only when the port control mode is not
MAC-based.
Unauthenticated
VL
AN ID
Indic
ates the unauthenticated VLAN configured for this port. This value is valid for the port
only when the port control mode is not MAC-based.
Session Timeout Indicates the time for which the given session is valid. The time period in seconds is returned
by the RADIUS ser
ver on authentication of the port. This value is valid for the port only
when the port control mode is not MAC-based.
Session
T
ermination Ac
tion
This value indicates the action to be taken once the session timeout expires. Possible values
are Default, Radius-Request. If the value is Default, the session is terminated the port goes
into unauthorized state. If the value is Radius-Request, a reauthentication of the client
authenticated on the port is performed. This value is valid for the port only when the port
control mode is not MAC-based.
Term Definition
Supplicant
MAC-Addr
ess
The MAC-address of the supplicant.
Authenticator
PAE S
tate
Current state of the authenticator PAE state machine. Possible values are Initialize,
Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuthorized,
and ForceUnauthorized.
Backend
A
uthentic
ation
State
Current state of the backend authentication state machine. Possible values are Request,
Response, Success, Fail, Timeout, Idle, and Initialize.
VLAN-Assigned The VLAN assigned to the client by the radius server.
Logical Port The logical port number associated with the client.
Term Definition
To Next Page
Loading...
Need help?
General