NETGEAR ProSAFE M7100-24X - Page 412

Utility Commands
412
ProSAFE M7100 Managed Switches
The following table lists the parameters for the copy command:
Source Destination Description
nvram:techsupport <url> Uploads the Technical Support file.
nvram:backup-config nvram:startup-config Copies the backup configuration to the startup
configur
ation.
nvram:clibanner <url> Copies the CLI banner to a server.
nvram:cpupktcapture.pcap <url> Uploads the CPU packets capture file.
nvram:crash-log <url> Copies the crash log to a server.
nvram:errorlog <url> Copies the error log file to a server.
nvram:log <url> Copies the log file to a server.
nvram:operational-log <url> Copies the operational log file to a server.
nvram:script <scriptname> <url> Copies a specified configuration script file to a server.
nvram:startup-config nvram:backup-config Copies the startup configuration to the backup
c
onfiguration.
nvram:startup-config <url> Copies the startup configuration to a server.
nvram:startup-log <url> Uploads the startup log file.
nvram:traplog <url> Copies the trap log file to a server.
system:running-config nvram:startup-config Saves the running configuration to nvram.
<url> nvram:clibanner Downloads the CLI banner to the system.
<url> nvram:script
<destfilename>
Downloads a configuration script file to the system.
During the download of a c
onfigur
ation script, the copy
command validates the script. In case of any error, the
command lists all the lines at the end of the validation
process and prompts you to confirm before copying the
script file.
<url> nvram:script
<destfilename> noval
When you use this option, the copy command will not
v
alidat
e the downloaded script file. An example of the
CLI command follows:
(NETGEAR Switch) #copy tftp://1.1.1.1/file.scr
nvr
am:script file.scr
<url> nvr
am:sshkey-dsa Downloads an SSH key file. For more information, see
Secure Shell (SSH) Commands on page 506.
<url> nvram:sshkey-rsa1 Downloads an SSH key file.
<url> nvram:sshkey-rsa2 Downloads an SSH key file.
<url> nvram:sslpem-dhweak Downloads an HTTP secure-server certificate.
<url> nvram:sslpem-dhstrong Downloads an HTTP secure-server certificate.