NETGEAR ProSAFE M7100-24X - Page 585

Green Ethernet Commands
585
ProSAFE M7100 Managed Switches
Tw_sys_tx (microsec) Integer that indicates the value of Tw_sys that the local system can support. This value
is updated by the EEE DLL Transmitter state diagram. This variable maps into the
aLldpXdot3LocTxTwSys attribute.
Tw_sys Echo (microsec) Integer that indicates the remote system's Transmit Tw_sys that was used by the local
s
y
stem to compute the Tw_sys that it wants to request from the remote system. This
value maps into the aLldpXdot3LocTxTwSysEcho attribute.
Tw_sys_rx (microsec) Integer that indicates the value of Tw_sys that the local system requests from the
r
emo
te system. This value is updated by the EEE Receiver L2 state diagram. This
variable maps into the aLldpXdot3LocRxTwSys attribute.
Tw_sys_rx Echo
(micr
osec)
Int
eger that indicates the remote systems Receive Tw_sys that was used by the local
system to compute the Tw_sys that it can support. This value maps into the
aLldpXdot3LocRxTwSysEcho attribute.
Fallback Tw_sys
(micr
osec)
Int
eger that indicates the value of fallback Tw_sys that the local system requests from
the remote system. This value is updated by the local system software.
Remote Tw_sys_tx
(microsec)
Int
eger that indicates the value of Tw_sys that the remote system can support. This
value maps from the aLldpXdot3RemTxTwSys attribute.
Remote Tw_sys Echo
(microsec)
Int
eger that indicates the value Transmit Tw_sys echoed back by the remote system.
This value maps from the aLldpXdot3RemTxTwSysEcho attribute.
Remote Tw_sys_rx
(microsec)
Int
eger that indicates the value of Tw_sys that the remote system requests from the
local system. This value maps from the aLldpXdot3RemRxTwSys attribute.
Remote Tw_sys_rx Echo
(microsec)
Int
eger that indicates the value of Receive Tw_sys echoed back by the remote system.
This value maps from the aLldpXdot3RemRxTwSysEcho attribute.
Remote Fallback Tw_sys
(microsec)
Int
eger that indicates the value of fallback Tw_sys that the remote system is
advertising. This attribute maps to the variable RemFbSystemValue as defined in
78.4.2.3.
Tx_dll_enabled Initialization status of the EEE transmit Data Link Layer management function on the
loc
al s
ystem.
Tx_dll_ready Data Link Layer ready: This variable indicates that the tx system initialization is
comple
te and is ready to update/receive LLDPDU containing EEE TLV. This variable is
updated by the local system software.
Rx_dll_enabled Status of the EEE capability negotiation on the local system.
Rx_dll_ready Data Link Layer ready: This variable indicates that the rx system initialization is
c
omple
te and is ready to update/receive LLDPDU containing EEE TLV. This variable is
updated by the local system software.
Cumulative Energy Saving Estimated Cumulative energy saved on this port in (Watts * hours) due to all green
modes enabled
Time Since Counters Last
Cle
ar
ed
Time Since Counters Last Cleared (since the time of power up, or after 'clear eee
counters' is executed)
Term Definition