NETGEAR ProSAFE M7100-24X - Page 593

Log Messages
593
ProSAFE M7100 Managed Switches
Table 13. DHCP Filtering Log Messages
Component Message Cause
DHCP Filtering Unable to create r/w lock for DHCP Filtering Unable to create semaphore used for dhcp
filtering c
onfiguration structure .
DHCP Filtering Failed to register with nv Store. Unable to register save and restore functions
for c
onfiguration save
DHCP Filtering Failed to register with NIM Unable to register with NIM for interface
callback func
tions
DHCP Filtering Error on call to sysapiCfgFileWrite file Error on trying to save configuration .
Table 14. NVStore Log Messages
Component Message Cause
NVStore Building defaults for file XXX A component’s configuration file does not
exis
t or the file’s checksum is incorrect so the
component’s default configuration file is
built.
NVStore Error on call to osapiFsWrite routine on file
XXX
Either the file cannot be opened or the OS’s
file I/O r
e
turned an error trying to write to
the file.
NVStore File XXX corrupted from file system.
Check
sum mismat
ch.
The calculated checksum of a component’s
configuration file in the file system did not
match the checksum of the file in memory.
NVStore Migrating config file XXX from version Y to Z A configuration file version mismatch was
de
t
ected so a configuration file migration has
started.
Table 15. RADIUS Log Messages
Component Message Cause
RADIUS RADIUS: Invalid data length - xxx The RADIUS Client received an invalid
message fr
om the server.
RADIUS RADIUS: Failed to send the request A problem communicating with the RADIUS
serv
er.
RADIUS RADIUS: Failed to send all of the request A problem communicating with the RADIUS
serv
er during transmit.
RADIUS RADIUS: Could not get the Task Sync
semaphore!
R
esource issue with RADIUS Client service.
RADIUS RADIUS: Buffer is too small for response
proc
essing
RADIUS Client attempted to build a response
larger than resources allow.