NETGEAR ProSAFE M7100-24X - Page 598

Log Messages
598
ProSAFE M7100 Managed Switches
SSLT SSLT: Can't connect to unsecure server at
XXXX, result = YYYY, errno = ZZZZ
Failed to open connection to unsecure server.
XXXX is the unsecure server socket address.
YYYY is the result returned from connect
function and ZZZZ is the error code.
SSLT SSLT: Msg Queue is full, event=XXXX Failed to send the received message to the
S
SL
T message queue as message queue is full.
XXXX indicates the event to be sent.
SSLT SSLT: Unknown UI event in message, event=
XXXX
Failed to dispatch the received UI event to
the appr
opriat
e SSLT function as it’s an
invalid event. XXXX indicates the event to be
dispatched.
SSLT ssltApiCnfgrCommand: Failed calling
s
sltIs
sueCmd.
Failed to send the message to the SSLT
message queue.
SSLT SSLT: Error loading certificate from file XXXX Failed while loading the SSLcertificate from
specified file. XX
XX indicates the file from
where the certificate is being read.
SSLT SSLT: Error loading private key from file Failed while loading private key for SSL
c
onnec
tion.
SSLT SSLT: Error setting cipher list (no valid
ciphers)
Failed while setting cipher list.
SSLT SSLT: Could not delete the SSL semaphores Failed to delete SSL semaphores during
cle
anup.of all r
esources associated with the
OpenSSL Locking semaphores.
Table 26. User_Manager Log Messages
Component Message Cause
User_Manager User Login Failed for XXXX Failed to authenticate user login. XXXX
indicat
es the user name to be authenticated.
User_Manager Access level for user XXXX could not be
det
ermined. Setting to READ_ONLY.
Invalid access level specified for the user. The
access level is set to READ_ONLY. XXXX
indicates the user name.
User_Manager Could not migrate config file XXXX from
v
ersion Y
YYY to ZZZZ. Using defaults.
Failed to migrate the config file. XXXX is the
config file name. YYYY is the old version
number and ZZZZ is the new version number.
Table 25. SSLT Log Messages
Component Message Cause