Xerox Phaser 7100

Maintenance
Phaser 7100 Service Manual Xerox Internal Use Only6-16
Color Registration
The printer automatically adjusts color registration when automatic adjustment is turned On and
every time a new Toner Cartridge is installed. Color registration can be adjusted manually any time the
printer is idle. Any time the printer is moved, color registration must be adjusted.
Automatic Color Registration Adjustment
1. On the Control Panel, press Menu.
2. Press Down Arrow and navigate to Admin Menu, and press OK.
3. Press Down Arrow and navigate to Image Quality, and press OK.
4. Press Down Arrow and navigate to Adjust Color Regi, and press OK.
5. Press Down Arrow and navigate to Auto Color Regi, and press OK.
6. A Press OK to adjust color registration screen appears.
7. Press OK to perform Color Registration process.
8. A Color registration is being adjusted... message appears while color registration is in progress.
9. Press Menu to return to the Ready to Print screen.