Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-283
REP 15.20 Option Drive Assembly
PL 15.2.28
1. Remove the 550 Left Feeder Cover (REP 15.8 550 Left Feeder Cover on page 4-268).
2. Remove the Turn Roller Clutch (REP 15.18 Turn Roller Clutch on page 4-280).
3. Disconnect the 2 wiring harness connectors P/J221 and P/J222 that are connected to the Option
Drive Assembly.
4. Remove 5 screws (silver, 6 mm) that secure the Option Drive Assembly to the 550-Sheet Feeder.
To Next Page
Loading...
