Xerox Phaser 7100 - 124-333 ASIC Fail (Panther); 124-337 ESS Standard RAM Error

Error Troubleshooting
Phaser 7100 Service Manual Xerox Internal Use Only2-384
124-333 ASIC Fail (Panther)/ 124-337 ESS Standard RAM Error
RAM error has occurred due to one of the following problems.
• Server error was detected.
• An ESS On Board Standard RAM error was detected.
Applicable Fault Codes
• 124-333: Panther Error
• 124-337: ESS Standard RAM (Standard ROM) Error
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
• 1 GB DDR2 DIMM, PL 12.4.2
Troubleshooting Procedure
Step Actions and Questions
1. Reinstall the NVRAM (REP 12.18 Memory (Standard) on page 4-232).
2. If the problem still persists, go to Common System Fail on page 2-406.