Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-203
REP 12.2 HVPS2 Fan
PL 12.1.3
CAUTION: Do not touch the IBT Belt surface.
1. Remove the IBT Unit (REP 9.10 IBT Unit on page 4-177).
2. Remove the Top Cover Assembly (REP 1.1 Top Cover Assembly on page 4-9).
3. Disconnect one wiring harness connector P/J4683 that is connected to the HVPS2 Fan.
4. Release the boss that is attached to the IBT Duct (PL 12.1.4) and pull the HVPS2 Fan out to
remove.
To Next Page
Loading...
