Xerox Phaser 7100 Service Manual

Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-117
REP 5.3 Bypass Tray Turn Roller
PL 5.1.8/ PL 5.1.98
CAUTION: Do not expose the Imaging Unit to light for more than 5 minutes. Cover the Imaging
Unit to avoid damage. Do not touch the surface of the Imaging Unit.
1. Remove Tray 1.
2. Remove the (K) Imaging Unit (REP 6.0 Imaging Unit (Y/ M/ C/ K) on page 4-121).
3. Remove the I/P PWB Cover Assembly (REP 1.5 Image Processor (I/P) PWB Cover Assembly on
page 4-19).
4. Remove the Rear Cover (REP 1.6 Rear Cover on page 4-20).
5. Remove the Left Side Cover (REP 1.10 Left Side Cover on page 4-25).
6. Remove the Right Side Cover (REP 1.11 Right Side Cover on page 4-27).
7. Remove the Right Feeder Cover (REP 2.3 Right Feeder Cover on page 4-40).
8. Remove the Right Turn Bracket Assembly (REP 2.4 Right Turn Bracket Assembly on page 4-41).
9. Remove the Paper Handling Drive Assembly (REP 11.7 Paper Handling Drive Assembly on
page 4-197).
10. Remove the Registration Clutch Assembly (REP 5.5 Registration Clutch Assembly on page 4-120).
11. Remove the CTD Sensor Assembly (REP 9.9 CTD Sensor Assembly on page 4-175).
12. Remove the Registration Chute Assembly (REP 5.1 Registration Chute Assembly on page 4-114).
13. Remove the Turn Clutch Assembly (REP 5.4 Turn Clutch Assembly on page 4-119).

Xerox Phaser 7100 Specifications

General

Brand	Xerox
Model	Phaser 7100
Category	Printer
Language	English