Service Parts Disassembly
Phaser 7100 Service Manual Xerox Internal Use Only4-240
REP 13.2 Top Frame Sub Assembly
PL 13.1.7
CAUTION: Do not touch the IBT Belt surface.
1. Remove the IBT Unit (REP 9.10 IBT Unit on page 4-177).
2. Remove the Top Cover Assembly (REP 1.1 Top Cover Assembly on page 4-9).
3. Remove the Top Right Guard Frame (REP 9.8 Top Right Guard Frame/ Holder Stand Bar on
page 4-172).
4. Remove the HVPS2 PWB (REP 12.1 HVPS2 PWB on page 4-202).
5. Close the Top Frame Assembly.
6. Disconnect the 2 Relay connectors P/J4683 and P/J5225 that are attached to the HV Transfer
Guide (PL 12.1.12) and remove the harness from the Harness Guide.
To Next Page
Loading...
