Xerox Phaser 7100

Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-307
(K/ Y/ M/ C) Developer Error: Life End
The Developer count has reached life end.
Applicable Fault Codes
• 093-413: Deve Life End (K)
• 093-418: Deve Life End (Y)
• 093-419: Deve Life End (M)
• 093-420: Deve Life End (C)
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure.
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
• Developer Housing Assembly (Y), PL 8.1.5 - PL 8.1.8
Troubleshooting Procedure
Step Actions and Questions
1. Replace the Housing Developer Assembly (REP 8.1 Developer Housing Assembly (Y/ M/ C/ K) on
page 4-137).
2. Perform DC135 HFSI on page 2-19 and reset the following Life Counters for the Developer Housing
Assembly (Y/ M/ C/ K).
• 950-812 - (K) Developer PV 000
• 950-828 - (K) Developer Roundtime 000
• 950-844 - (K) Developer Pixel Count 000
• 950-808 - (Y) Developer PV
• 950-816 - (Y) Developer Roundtime
• 950-832 - (Y) Developer Pixel Count
• 950-804 - (M) Developer PV
• 950-820 - (M) Developer Roundtime
• 950-836 - (M) Developer Pixel Count
• 950-808 - (C) Developer PV
• 950-824 - (C) Developer Roundtime
• 950-840 - (C) Developer Pixel Count