Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-253
Tray 2 Mode Fail
Tray 2 DL mode has activated.
Applicable Fault Code
• 072-312: Tray 2 Mode Fail
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure.
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
• Feeder PWB, PL 15.2.33
Troubleshooting Procedure
Step Actions and Questions
1. Refer to Option Feeder Mode Error on page 2-451.
To Next Page
Loading...
Need help?
General