Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-337
116-343 Main PWBA IC Fail
Irregularity was detected in the IC of the I/P PWB.
Applicable Fault Code
• 116-343: Main PWBA IC Fail
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
• Image Processor PWB, PL 12.4.1
Troubleshooting Procedure
Step Actions and Questions
1. Go to Common System Fail on page 2-406.
To Next Page
Loading...
