Xerox Phaser 7100

Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-133
Simple Transmission Report Invocation Error
Simple Destination Result report output has failed.
Applicable Fault Code
• 016-734: Simple Destination Result Report Output Error
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Updating Job Template
Job template error has occurred.
Applicable Fault Code
• 016-735: <Updating Job Template> The system attempted to output the Job Template List while
the Job Template is being updated.
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Procedure
Step Actions and Questions
1. Set Receive via SMTP for E-mail receive setting on the sending device.
2. Remove the restriction on receiving E-mails from a self-domain in the receivable domain list if any.
Troubleshooting Procedure
Step Actions and Questions
1. Perform the operation again after the Job Template update has completed.