Xerox Phaser 7100

Plug/Jack and Wiring Diagrams
Xerox Internal Use Only Phaser 7100 Service Manual 7-13
Plug/Jack Locators
Maps 1 through 14 indicate the location of key connections within the printer, Duplex Unit, and 550-
Sheet Feeder Unit. Connections are referenced by their P/J designation.
1. Map 1 - Front Side, Feeder, Fuser, Registration on page 7-14
2. Map 2 - Front Side, Left Side, CTD Sensor, Developer PWB, CRUM on page 7-15
3. Map 3 - Top Front, HVPS2 PWB, Interlock Switch, Transfer on page 7-16
4. Map 4 - Top Rear, LVPS PWB on page 7-17
5. Map 5 - Top Rear, Frame, Interlock Switch on page 7-18
6. Map 6 - Right Side, Temp/ Humidity Sensor, Size Switch on page 7-19
7. Map 7 - Left Side, AC PWB on page 7-20
8. Map 8 - Left Side, AC PWB, MCU PWB on page 7-21
9. Map 9 - Rear Side, Feeder, MCU PWB, Size Switch on page 7-22
10. Map 10 - Rear Side, HDD, HVPS1 PWB, I/P PWB, LVPS PWB on page 7-23
11. Map 11 - Laser Unit, LVPS PWB on page 7-24
12. Map 12 - Duplex PWB on page 7-25
13. Map 13 - Duplex Unit on page 7-26
14. Map 14 - 550-Sheet Feeder on page 7-27