Error Troubleshooting
Phaser 7100 Service Manual Xerox Internal Use Only2-274
Paper Handling (P/H) Motor Failure
The Paper Handling Motor rotation error is detected.
Applicable Fault Code
• 077-323: Paper Handling Motor Fail
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure.
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
• Paper Handling Motor (P/H Drive Assembly), PL 11.1.19
• MCU PWB, PL 12.1.15
• LVPS PWB, PL 12.2.1
• Main Harness Assembly, PL 12.3.1
• Paper Handling Motor Harness Assembly, PL 12.3.9
• Drive 2/ Bypass Tray on page 7-45
Troubleshooting Procedure
Step Actions and Questions
1. Go to Paper Handling Motor on page 2-435.
To Next Page
Loading...
