Xerox Phaser 7100

Error Troubleshooting
Phaser 7100 Service Manual Xerox Internal Use Only2-226
Mandatory User Not Entered
With the required user entry not entered, the instruction to start the job was given.
Applicable Fault Code
• 027-752: Mandatory User Not Entered
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure.
Job Flow Service Request Disabled
Job is executed by instruction when the service is disabled.
Applicable Fault Code
• 027-753: Invalid Instruction Service
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure.
Troubleshooting Procedure
Step Actions and Questions
1. Do not link the box to the instruction that requires user entry.
2. Set preset values for the items in the instruction requiring user entry.
3. If the problem still persists, go to Common Job Fail on page 2-407.
Troubleshooting Procedure
Step Actions and Questions
1. Enable the service.
2. If the problem still persists, go to Common Job Fail on page 2-407.