Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-251
REP 14.3 Duplex Roller
PL 14.2.9
1. Remove the Duplex Unit (REP 14.1 Duplex Unit on page 4-249).
2. Remove the Duplex Motor Assembly (REP 14.5 Duplex Motor Assembly on page 4-256).
Note: When removing the Duplex Drive Gear Assembly (PL 14.2.22) in the following step, be
careful not to drop the Bearing and the Gear.
3. Remove 2 screws that secure the PWB Shield (PL 14.3.10) and remove the Shield.
Figure 1
To Next Page
Loading...
