Xerox Phaser 7100

Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-309
(K) Toner Cartridge Error: Life End
Toner Cartridge error has occurred for one of the following problems.
• The Black Dispense Motor rotation time had reached the specified value and the toner has ran
out.
• Toner K is Empty and any of the Toner YMC is also Empty.
Applicable Fault Codes
• 093-912: Toner K Empty
• 093-963: Plural Toner Empty
Initial Actions
• Check the Toner Cartridge life. Access CWIS > Status > Consumables.
• If the problem persists, perform the following procedure.
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
• Toner Cartridge Assembly (K), PL 8.1.4
Troubleshooting Procedure
Step Actions and Questions
1. Replace the Toner Cartridge (K) (REP 8.0 Toner Cartridge Assembly (Y/ M/ C/ K) on page 4-136).