Xerox Phaser 7100

Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-145
Auditron - Reached Limit
The registered user has reached the limit.
Applicable Fault Code
• 016-759: Auditron - Reached Limit
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
PS Decompose Failure
An error occurred in the Decompose processing.
Applicable Fault Code
• 016-760: <PS Decompose Error> An error occurred in the Decompose processing.
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Procedure
Step Actions and Questions
1. Consult with the Account Administrator and request to set the number of copies, etc.
Troubleshooting Procedure
Step Actions and Questions
1. Resend the job.
If the problem persists, check the execution environment/ data.