Xerox Phaser 7100

Error Troubleshooting
Phaser 7100 Service Manual Xerox Internal Use Only2-144
Auditron - Invalid User
The account is not registered.
Applicable Fault Code
• 016-757: Auditron - Invalid User
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Auditron - Disabled Function
An Illegal Account is detected.
Applicable Fault Code
• 016-758: Auditron - Disabled Function
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Procedure
Step Actions and Questions
1. Set up the account and then repeat the operation.
Troubleshooting Procedure
Step Actions and Questions
1. Set the new function that is allowed for that account and try again.
2. Request the Account Administrator to add the rights.