Xerox Phaser 7100

Error Troubleshooting
Phaser 7100 Service Manual Xerox Internal Use Only2-328
116-325 ESS Fan Fail
Irregularity has occurred in the ESS Fan rotation.
Applicable Fault Code
• 116-325: ESS Fan Fail
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
• Image Processor PWB, PL 12.4.1
• I/P PWB Fan, PL 12.4.6
Troubleshooting Procedure
Step Actions and Questions
1. Replace the ESS Fan (REP 12.20 Image Processor PWB Fan on page 4-235).
2. If the problem persists, replace the I/P PWB (REP 12.17 Image Processor (I/P) PWB on page 4-228).