Xerox Phaser 7100

Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-25
REP 1.10 Left Side Cover
PL 1.1.15
1. Remove the I/P PWB Cover Assembly (REP 1.5 Image Processor (I/P) PWB Cover Assembly on
page 4-19)
2. Remove the Rear Cover (REP 1.6 Rear Cover on page 4-20).
3. Release latch A and open the Front Frame Assembly (PL 4.1.6).
4. Release latch C and open the Top Cover Assembly (PL 1.1.1) together with the Toner Cartridge
Cover Assembly (PL 1.1.12).
CAUTION: Be sure to hold the Toner Cartridge Cover Assembly together with the Top Cover
Assembly to prevent the Toner Cartridge Cover Assembly from swinging loosely.
5. Release the Stand Bar Assembly (PL 9.1.26) from the Top Cover Assembly and secure the Stand
Bar in the holder.
CAUTION: Do not touch the bottom of the IBT Belt to prevent damaging the IBT Belt.
C
s7100-251
s7100-252
1
2