Error Troubleshooting
Phaser 7100 Service Manual Xerox Internal Use Only2-212
Net Off Line
Net off line error has occurred due to the following problems.
• Communication is not available due to other failures.
• Communication is not available because panel operation is in progress.
• Communication is not available because a third party is using remote access.
Applicable Fault Code
• 027-400: Net Off Line
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure.
Troubleshooting Procedure
Step Actions and Questions
1. Clear any failure that is indicated by other displayed messages.
If the Control Panel operation is in progress, complete it.
If remote access is being used, wait for the access to end.
To Next Page
Loading...
