Service Parts Disassembly
Phaser 7100 Service Manual Xerox Internal Use Only4-44
REP 2.7 Protect Cover Assembly
PL 2.1.8
1. Remove Tray 1.
2. Remove the I/P PWB Cover Assembly (REP 1.5 Image Processor (I/P) PWB Cover Assembly on
page 4-19).
3. Remove the Rear Cover (REP 1.6 Rear Cover on page 4-20).
4. Remove the Right Side Cover (REP 1.11 Right Side Cover on page 4-27).
5. Remove the Right Feeder Cover (REP 2.3 Right Feeder Cover on page 4-40).
6. Release the wiring harnesses from the harness holders on the Protect Cover Assembly.
To Next Page
Loading...
