Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-339
116-353 HDD Physical Fail
During start up, a physical irregularity was detected in the HDD, and it is unable to start up.
Applicable Fault Code
• 116-353: <HDD Physical Fail>
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
• HDD Productivity Kit, PL 12.4.20
Troubleshooting Procedure
Step Actions and Questions
1. Go to HDD System Fail on page 2-408.
To Next Page
Loading...
