Service Parts Disassembly
Phaser 7100 Service Manual Xerox Internal Use Only4-218
REP 12.11 Front Cover Interlock Switch Assembly
PL 12.2.8
CAUTION: Do not touch the IBT Belt surface.
1. Remove the IBT Unit (REP 9.10 IBT Unit on page 4-177).
2. Remove the Top Cover Assembly (REP 1.1 Top Cover Assembly on page 4-9).
3. Disconnect the wiring harness connector P/J5226 that is connected to the Interlock Switch
Assembly.
4. Remove one screw that secures the Front Cover Interlock Switch Assembly to the Top Frame Sub
Assembly (PL 13.1.7) and remove the Interlock Switch Assembly.
To Next Page
Loading...
