Xerox Phaser 7100

Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-119
Job Ticket Media Error
The decomposer detected that the paper attributes specified in the Job Ticket is one that cannot be
recognized by the device as a supported paper (size, type, color).
Applicable Fault Code
• 016-572: XPIF Media Conversion Error
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Job Ticket Parse Error
The XPIF parser has received and processed a Job Ticket containing a syntax that cannot be
interpreted.
Applicable Fault Code
• 016-573: XPIF Interpretation Error
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Procedure
Step Actions and Questions
1. Check whether the paper (size, type, color) that had been specified in Job Ticket is printable at the
device that it was sent to.
Troubleshooting Procedure
Step Actions and Questions
1. Check whether the client that generates the Job Ticket had been installed correctly, has met all the
operation conditions, and that the combination of its version and the device's are matched.