Xerox Phaser 7100 Service Manual

Service Parts Disassembly
Phaser 7100 Service Manual Xerox Internal Use Only4-108
REP 4.10 Transfer Roller (2nd BTR Unit)
PL 4.3.18
1. Release latch A and open the Front Frame Assembly (PL 4.1.6).
2. Press the latches on the left and the right of the Transfer Roller while turning and lifting it upwards
to remove.
Replacement Note: After replacing the Transfer Roller (2nd BTR), be sure to reset the 2nd BTR
Counter (Resetting the Transfer Roller (2nd BTR) Counter on page 6-12).
s7100-255
s7100-208
1
2

Xerox Phaser 7100 Specifications

General

Brand	Xerox
Model	Phaser 7100
Category	Printer
Language	English