Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-49
REP 2.10 Left Feeder Cover
PL 2.1.13
1. Remove Tray 1.
2. Remove the I/P PWB Cover Assembly (REP 1.5 Image Processor (I/P) PWB Cover Assembly on
page 4-19).
3. Remove the Rear Cover (REP 1.6 Rear Cover on page 4-20).
4. Remove the Left Side Cover (REP 1.10 Left Side Cover on page 4-25).
5. Remove 4 screws (silver, 6mm) that secure the Left Feeder Cover.
6. Release the 2 bosses of the Feeder Cover from the frame while sliding the Left Feeder Cover out to
remove.
To Next Page
Loading...
