Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-329
116-328/ 116-329
System error has occurred due to one of the following problems.
• Failure was detected in the level 2 cache within the CPU.
• A serial I/F related system call error was detected
Applicable Fault Codes
• 116-328: CPU Built-in Level 2 Cache Failure
• 116-329: <Serial I/F-related Fatal Error> System call error related to Serial I/F.
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Procedure
Step Actions and Questions
1. Go to Common System Fail on page 2-406.
To Next Page
Loading...
Need help?
General