Xerox Phaser 7100

Service Parts Disassembly
Phaser 7100 Service Manual Xerox Internal Use Only4-118
14. Remove the KL Clip that secures the Turn Gear Assembly 17 (PL 5.1.6) to the Bypass Tray Turn
Roller.
15. Pull out and remove the Turn Gear Assembly 17.
16. Remove the E-ring that secure the left Bearing (PL 5.1.7).
17. Slide the left and right Bearings towards the inner side.
18. Slide the Bypass Tray Turn Roller to the left, free the right side of the Bypass Tray Turn Roller from
the hole, and then pull it to the right and upwards to remove.
s7100-123
E-Ring
E-Ring
(Keep in Place)
KL-Clip