Xerox Phaser 7100 Service Manual

Maintenance
Xerox Internal Use Only Phaser 7100 Service Manual 6-29
CAUTION: DO NOT power Off the printer while firmware update is in progress.
15. The Firmware Update Tool (Update in Progress) window appears showing firmware download
status.
Note: If a Failed to update message appears, Software Upgrades/ Download is not enabled (in
CWIS and/or Control Panel), refer to Enabling Software Upgrades/ Download on page 6-22 to
enable Software Upgrade.
Click OK, Finish, and Yes to continue.
Firmware Update Failed Message

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm