Plug/Jack and Wiring Diagrams
Phaser 7100 Service Manual Xerox Internal Use Only7-46
Drive 2/ Bypass Tray Signal Lines
Signal Line Name Description
Bypass Tray Paper Sensed Signal The signal for detecting paper in the Bypass Tray by the Bypass Tray
No Paper Sensor
(Paper detected: L)
Bypass Tray Feed Solenoid On The On/ Off Control signal of the Bypass Tray Feed Solenoid
Alarm (Fuser Motor) The Alarm signal from the Fuser Motor
Clock (Fuser Motor) The Clock signal of the Fuser Motor
Motor On (Fuser Motor) The On/ Off Control signal of the Fuser Motor
Motor BRK (Fuser Motor) The Control signal of the Fuser Motor
CW/ CCW (Fuser Motor) The Forward rotation/ Reverse rotation Control signal of the Fuser
Motor
Motor Gain (Fuser Motor) The Control signal of the Fuser Motor
ST/ SP C (Deve Motor) The On/ Off Control signal of the Developer Motor (C)
ST/ SP M (Deve Motor) The On/ Off Control signal of the Developer Motor (M)
ST/ SP Y (Deve Motor) The On/ Off Control signal of the Developer Motor (Y)
ST/ SP K (Deve Motor) The On/ Off Control signal of the Developer Motor (K)
Clock (Deve Motor) The Clock signal of the Developer Motor (Y/ M/ C/ K)
Alarm C (Deve Motor) The Alarm signal from the Developer Motor (C)
Alarm M (Deve Motor) The Alarm signal from the Developer Motor (M)
Alarm Y (Deve Motor) The Alarm signal from the Developer Motor (Y)
Alarm K (Deve Motor) The Alarm signal from the Developer Motor (K)