Xerox Phaser 7100

Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-55
010-421 Fuser Unit Life End Quality 2-86
010-906 Fuser Unit Life End 2-86
016
016-322 JBA Accounting Data Full 2-87
016-328 Cont-MCU Cable Connection Fail 2-88
016-336 Cont Program ROM Fail-2 2-89
016-350 Cont SEEP-ROM Fail-1 2-90
016-351 Cont SEEP-ROM Fail-2 2-91
016-365 Cont USB2.0 Device Fail 2-92
016-372 Cont HDD FileSystem Fail-A 2-93
016-373 Cont HDD FileSystem Fail-B 2-93
016-374 Cont HDD FileSystem Fail-C 2-93
016-375 Cont HDD FileSystem Fail-D 2-93
016-376 Cont HDD FileSystem Fail-E 2-93
016-377 Cont HDD FileSystem Fail-F 2-93
016-378 Cont HDD FileSystem Fail-G 2-93
016-379 Cont HDD FileSystem Fail-H 2-93
016-380 Cont HDD FileSystem Fail-I 2-93
016-381 Cont HDD FileSystem Fail-J 2-93
016-382 Cont HDD FileSystem Fail-P 2-93
016-400 802.1x Authentication Error (incorrect user name or password) 2-94
016-401 802.1x Authentication Method Mismatch 2-95
016-402 802.1x Authentication Timeout 2-95
016-403 802.1x Authentication Certificate Mismatch 2-96
016-404 Other 802.1x Authentication Errors 2-96
016-405 Certificate DB File Error 2-97
016-406 802.1x Authentication Client Certificate Setting Error 2-97
016-450 SMB Host Name Duplicated 2-98
016-453 Dynamic DNS - IPv6 Address Dynamic Update Failed (DMP2007) 2-98
016-454 Dynamic DNS - IPv4 Address Dynamic Update Failed 2-98
Error Message and Chain Link Code Display (Continued)
Chain Link Control Panel Message Go to Page