Error Troubleshooting
Phaser 7100 Service Manual Xerox Internal Use Only2-334
116-336/ 116-337
NVRAM error has occurred due to one of the following problems.
• An error was detected when HDD was accessed.
• A problem has occurred in the software processing and it is unable to continue with the
subsequent processes.
Applicable Fault Codes
• 116-336: <Redirector Fail> HDD failure detected in the Redirector.
• 116-337: SNTP-related Fatal Error
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
• HDD Productivity Kit, PL 12.4.20
Troubleshooting Procedure
Step Actions and Questions
1. Go to HDD System Fail on page 2-408.
To Next Page
Loading...
