Xerox Phaser 7100

General and Operation Overview
Xerox Internal Use Only Phaser 7100 Service Manual 1-27
Control Panel Shortcut
Function Control Panel Buttons
Enter/ Exit Service Diagnostics (Service Diagnostics
Menu Map on page 2-15)
1. Press and hold Right Arrow.
2. Press and hold Left Arrow.
3. Release both buttons.
4. Press Online within 3 seconds.
Enter/ Exit Customer Support Engineer (CSE) Menu
(to access additional reports and features, Phaser
7100 Printer Menu (Customer Support Engineer) on
page 2-4)
1. Press Up Arrow three times.
2. Press Menu.
Display Serial Number Menu 1. Press Down Arrow + OK simultaneously.
2. Serial Number is displayed on the Control Panel.
Reset Counter 1. Press Down Arrow + OK simultaneously.
2. Press Down Arrow to find Reset Counter.
Long Boot Diagnostics 1. Turn On the printer power while pressing Energy
Saver + OK simultaneously.