Xerox Phaser 7100

Image Quality
Xerox Internal Use Only Phaser 7100 Service Manual 3-51
10. Press Right Arrow and use Up/ Down Arrow to change the quantity information.
11. Press OK.
12. An “
* ” is displayed next to the quantify information.
13. Press OK to display the Tray selection.
14. Press Right Arrow to the Tray selection option.
15. Use Up/ Down Arrow to change the Tray.
16. Press OK to confirm printing from the selected Tray.
17. An “
* ” is displayed next to the Tray information.
18. Press OK.
19. A Press the OK to run message appears.
20. Press OK to print.