Xerox Phaser 7100 Service Manual

Service Parts Disassembly
Phaser 7100 Service Manual Xerox Internal Use Only4-100
5. Release the 4 tabs that secure the Fuser Motor Harness Cover (PL 4.2.14) to the D Gear Cover (PL
4.2.15) and remove the Fuser Motor Harness Cover.
6. Disconnect the wiring harness connectors P/J242 and P/J4755 that are connected to the Fuser
Drive Assembly and remove the harness from D Gear Cover.
7. Remove 2 screws (silver, 6 mm) that secure the D Gear Cover to the Front Frame Assembly.
8. Release the wiring harness from the D Gear Cover and release the 2 tabs while removing the D
Gear Cover.
s7100-226
P/J242
P/J4755
D Gear Cover
Tab
Tab
Fuser Harness
Motor Cover
Tab

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm