Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-291
6. Remove 2 screws (silver, tapped, 8 mm) that secure the Tray Handle.
Note: When performing the following step, be careful not to drop the Paper Size Stopper (PL
15.3.26) and the Paper Size Card (PL 15.3.25).
7. Use a screwdriver to release the locks while pushing in the 4 bosses on the right and lefts sides of
the Front Chute and remove the Tray Handle.
To Next Page
Loading...
