Xerox Phaser 7100 Service Manual

Parts List
Xerox Internal Use Only Phaser 7100 Service Manual 5-27
Parts List 4.3 Front Frame (3 of 4)
Item Description Part Number
1. -----
2. Right CRU Fusing Lever
3. Left CRU Fusing Lever
4. Lever Spring
5. Resistor
6. Main Holder
7. Main Spring
8. FD Harness Cover
9. Connector Bracket
10. Bypass Tray Feed Solenoid (REP 4.9 Bypass Tray Feed Solenoid on
page 4-104)
121K45700
11. -----
12. Low Trans Chute
13. Turn Pinch Roller Assembly
14. -----
15. Turn Pinch Spring (silver)
16. -----
17. -----
18. Transfer Roller (2nd BTR Unit) (REP 4.10 Transfer Roller (2nd BTR
Unit) on page 4-108)
604K78291
19. -----
20. -----
21. -----
22. Top Harness Cover
23. Connector Cap
24. -----
25. Right Lever Base
26. Lever Pin
27. Lever Spring
28. 2nd BTR Lever
29. Right Base Ground Plate

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm