Log Messages
604
ProSAFE M7100 Managed Switches
Table 39. 802.1S Log Messages
Component Message Cause
802.1S dot1sIssueCmd: Dot1s Msg Queue is
full!!!!Ev
ent: %u, on interface: %u, for
instance: %u
The message Queue is full.
802.1S dot1sStateMachineRxBpdu(): Rcvd BPDU
Discar
ded
The current conditions, like port is not
enabled or we are currently not finished
processing another BPDU on the same
interface, does not allow us to process this
BPDU
802.1S dot1sBpduTransmit(): could not get a buffer Out of system buffers
Table 40. Port Mac Locking Log Message
Component Message Cause
Port Mac Locking pmlMapIntfIsConfigurable: Error accessing
PML c
onfig data for interface %d in
pmlMapIntfIsConfigurable.
A default configuration does not exist for this
interface. Typically a case when a new
interface is created and has no
pre-configuration.
Table 41. Protocol-based VLANs Log Messages
Component Message Cause
Protocol Based
VLANs
pbVlanCnf
grInitPhase2Process: Unable to
register NIM callback
Appears when nimRegisterIntfChange fails to
register pbVlan for link state changes.
Protocol Based
VLANs
pbVlanCnf
grInitPhase2Process: Unable to
register pbVlan callback with vlans
Appears when vlanRegisterForChange fails to
register pbVlan for vlan changes.
Protocol Based
VLANs
pbVlanCnf
grInitPhase2Process: Unable to
register pbVlan callback with nvStore
Appears when nvStoreRegister fails to
register save and restore functions for
configuration save.
To Next Page
Loading...
